tksite.blogg.se - Rf isolator options

Rf isolator options software#

A three-port circulator would be used with one port being the antenna and the other ports being the transmit and receive chains. For example, in commercial base stations where the transmit and receive chains share a common antenna, it is desirable to separate the receive chain path from the transmit path and vice versa. To use a street analogy, an isolator behaves as a one-way street while a circulator behaves as a traffic circle.

Use the Speed and Position fields to adjust the turntable.Isolators and circulators have long been used for both military and commercial applications whenever RF signal needs to be directed down a circuit path and blocked from another circuit path.

In the Chamber View window, right-click on the chamber C0 and select Modify.

You will see a new chamber, C0 in the Chamber View window.

Select your LANforge server resource that manages the turntable.

For Turntable, put in the IP address of the chamber.

You will see the Create/Modify Chamber window.

In the Chamber View window, right-click on the main window and select New Chamber.

Seal this with screw-caps when not in use. Seal this with terminators when not in use. Seal these with terminators when not in use. Use these for 12v (or other) power needed by devices in the chamber.

The turn table power cord plugs into the power strip.

This power plug provides power to the chamber modbus controller and the chamber lights.The rear ports are all accessory ports for the chamber.The LANforge server will communicate over the network to the Chamber Eth port. Make sure you can ping the chamber from your laptop and/or the machine running LANforge server.Use the front touch screen to set an IP address.The chamber controller is accessed on the network via the Chamber Eth or Control LAN port.It should be run up to the top of the turntable with the 12v power cord. That comes out at the Turnable Eth or Plate LAN port. Below the turntable is an Ethernet jack for the DUT to use.The USB camera has a dedicated USB port, Camera USB or Camera USB port.Accessories or DUTs can be cabled to the Device USB port, or USB port.

This is run up to the top of the turntable.

The Turnable Power or Plate DC port is for a 12v or other power required by the DUT on the turntable.

The Chamber Power or DC port is for 12v or other power required by devices inside the chamber.

The chamber controller and lights are powered via AC cords at the outside bottom rear of the CT840a chamber.

Depending on the date manufacture, these ports might be labeled differently. Plug an Ethernet cable into the Control LAN port at the bottom rear of the chamber.

The CT840a requires a network connection.

Different Interface options are available.

LANforge WiFi test systems and automation software.

Unless otherwise noted in the product description, these features usually cost extra: List Price with 1 Year support (17%): $24,570

Working Temperature: Normal room temperature.

Rf isolator options software#

Includes built-in 2D turn-table with software automation support.RF Absorber material: -10db to -20db RF Absorber spec sheet.Both filters may be installed by customer with help

RF-Pipe for coax/fiber passthrough is not installedīy default either to protect from shipping damage. RF isolation so it is not installed by default. Standard Interfaces: 16x SMAs, USB 3.0, USB-C, 3x 10G Ethernet, 4K HDMI, RF Coax, Fiber,įan, DC power, universal A/C power strip.Isolation: 85+ dB Example Isolation Test Results.TR-398 Automated WiFi Issue 2 - Virtual StationsĬandela Technologies Inc., 2417 Main Street, Suite 201, P.O.image/svg+xml Icon_home_remixofdynamitt Icon_home_remixofdynamitt.